How to Download and Install VAG K+CAN Commander 3.6 for Windows 7
How to Download and Install VAG K+CAN Commander 3.6 for Windows 7
VAG K+CAN Commander 3.6 is a professional diagnostic tool and code reader for all VAG cars using CAN protocol. It supports various functions such as reading and clearing trouble codes, viewing measured values, performing adaptations and coding, odometer correction, TV-activation, key programming, immobilizer data reading and writing, EEPROM reading and writing, and more. In this article, we will show you how to download and install VAG K+CAN Commander 3.6 for Windows 7.
vag k can commander download for windows 7
Step 1: Download VAG K+CAN Commander 3.6 software
You can download VAG K+CAN Commander 3.6 software from various online sources, such as [^1^], [^2^], or [^4^]. Make sure you download the full version of the software that includes the drivers and the interface firmware. The file size is about 3.32 MB and it is in ZIP format.
Step 2: Extract the ZIP file
After downloading the software, you need to extract the ZIP file to a folder on your computer. You can use any software that can unzip files, such as WinRAR or 7-Zip. To extract the file, right-click on it and select "Extract Here" or "Extract to VAG-K_CAN_Commander_3.6". You will see a folder named "VAG-K_CAN_Commander_3.6" with several files inside.
Step 3: Install the drivers
Before you can use VAG K+CAN Commander 3.6, you need to install the drivers for the device. To do this, follow these steps:
Connect the VAG K+CAN Commander 3.6 device to your computer via USB cable.
Wait for Windows to detect the device and prompt you to install the drivers.
Select "Browse my computer for driver software".
Browse to the folder where you extracted the ZIP file and select the "Drivers" folder.
Click "Next" and follow the instructions to complete the installation.
If Windows asks you to confirm the installation of unsigned drivers, click "Install this driver software anyway".
Once the installation is finished, you should see a message saying "VAG K+CAN Commander has been successfully installed".
Step 4: Run VAG K+CAN Commander 3.6 software
Now you are ready to run VAG K+CAN Commander 3.6 software and use it with your car. To do this, follow these steps:
Open the folder where you extracted the ZIP file and double-click on the file named "Vag_KCan_Commander.exe".
You should see a window with the VAG K+CAN Commander logo and some buttons.
Select your language from the drop-down menu at the top right corner.
Connect the VAG K+CAN Commander 3.6 device to your car's OBD port via OBD cable.
Turn on the ignition of your car.
Click on the button that corresponds to the function you want to perform, such as "Diagnostic", "Odometer", "TV-Activation", etc.
Follow the instructions on the screen to complete the operation.
Conclusion
VAG K+CAN Commander 3.6 is a powerful tool that can help you diagnose and program your VAG car using CAN protocol. It is compatible with Windows 7 and other operating systems such as Windows XP, Vista, 98, and 2000. To use it, you need to download and install the software and drivers, connect the device to your computer and car, and run the software. You can perform various functions such as reading and clearing trouble codes, viewing measured values, performing adaptations and coding, odometer correction, TV-activation, key programming, immobilizer data reading and writing, EEPROM reading and writing, and more. e0e6b7cb5c